2008 Audi S4 Avant (B8) |
|
| Manufacturer | Audi AG |
|---|---|
| Production | 1991–present |
| Assembly | Ingolstadt, Germany |
| Class | Compact executive car, Sport compact, Sports sedan |
| Layout | longitudinal front engine, four-wheel drive |
| Related | Audi A4 Audi RS4 |
The Audi S4 is the high performance variant of Audi's compact executive car A4. The original Audi S4, built from 1991 until 1994, was a performance-oriented version of Audi's 100 saloon/sedan. All subsequent S4s since 1997 have been based on the Audi A4; and as the A4 has evolved from one generation to the next, so has the S4.
A more powerful internal combustion engine, larger upgraded brakes, firmer suspension, larger roadwheels, and distinctive sheetmetal, styling clues and badging have always been amongst the many upgrades the S4 receives over its mainstream 100 and A4 siblings. In markets where the even higher-performance Audi RS4 is not offered, the S4 is the top-of-the-line trim of the A4 family.[1][2]
Like its regular A4 counterpart, all S4 variants have had longitudinally oriented, front-mounted engines. A single turbocharged 2.2 litre inline five-cylinder powered the original C4 version, and a 2.7 litre 'biturbo' V6 engine was found in the B5 generation. The B6 and B7 versions shared a common 4.2 litre V8 engine, the first time that a V8 engine was placed in a compact executive car, placing it in direct competition with the BMW M3 which at the time had a 3.2 L inline 6. The recently introduced B8 generation uses a supercharged 3.0 litre V6 TFSI engine and competes with the BMW 335i.[1]
All versions of the S4 have their transmission mounted immediately at the rear of the engine in a longitudinal orientation, in the form of a transaxle, and like all Audi "S" cars, are only available as standard with Audi's quattro four-wheel drive (4WD) system, using a Torsen-based centre diff system.[3]
All versions of the S4 have been manufactured at Audi's plant in Ingolstadt, Germany; they are, or have been available as a four-door five-seat saloon and a five-door five-seat Avant (Audi's name for an estate car/station wagon) body styles since the model's inception in 1991. A two-door four-seat Cabriolet (convertible) S4 variant was introduced as part of the B6 and B7 generation A4 lineups. The B8 Cabriolet has now been built off the A5 coupe body style and the "S" variant is marketed under the Audi S5 nameplate.
Contents |
Audi C4 S4 saloon "Ur-S4" (Europe) |
|
| Also called | "Ur-S4" |
|---|---|
| Production | August 1991–July 1994[3] |
| Successor | Audi C4 S6, Audi B5 S4 |
| Body style | 4-door saloon/sedan 5-door estate/wagon (Avant) |
| Platform | Volkswagen Group C4 |
| Engine | 2.2 L I5 20v DOHC turbo (08/91-07/94)[3] 4.2 L V8 32v 2xDOHC(10/92-07/94)[3] |
| Transmission | 5-speed manual 6-speed manual 4-speed automatic[3] |
| Wheelbase | 2,692 mm (106.0 in) |
| Length | 4,790–4,982 mm (188.6–196.1 in) |
| Width | 1,803 mm (71.0 in) |
| Height | 1,443 mm (56.8 in) |
| Kerb weight | saloon: 1,730 kg (3,814 lb) estate: 1,780 kg (3,924 lb) |
| Related | Audi C4 100 Audi C4 A6 Audi C4 S6 |
Factory production of the original Audi S4 (Typ 4A) began in August 1991 to serve as the performance version of the newly updated C4 platform 100 four-door, five-seat saloon. It was designed to replace the outgoing C3 based Audi 200 quattro turbo, which had been Audi's first true sports-saloon and had been discontinued at the end of 1990.[4][5] Being the first S4 model from Audi, it is commonly referred to as the Ur-S4, derrived from the German: Ursprünglich augmentive word (meaning: original).
Audi mildly updated the C4-based model line in 1994 and dropped the 100 nomenclature; all variants of the former Audi 100 line were now re-badged as the Audi A6. In line with the switch in model name, Audi temporarily discontinued the use of the S4 name and began selling an updated but fundamentally identical version of the car, based on the "new" A6 and badged as S6. Despite the change in name, differences between the outgoing S4 and incoming S6 were primarily cosmetic.
A more powerful, more expensive and more exclusive variant known first as the S4 Plus and later as the S6 Plus was available from October 1992 through to July 1994.[3] Built in very small numbers, the "Plus" models featured numerous performance enhancing upgrades; including the use of Audi's 4.2 litre V8 engine in place of the then current inline-five engine.
An all-new C5-based Audi A6 debuted for 1997, after which the S4 and S6 became distinctly separate models based on very different platforms.
The C4 variant S4 ended factory production after less than three years in July 1994.[3]
In standard form, the powertrain detail of the C4-based S4 was available with only one engine, a single turbocharged and intercooled version of Audis 2.2 litre 20-valve inline five cylinder engine This displaced 2,226 cubic centimetres (135.8 cu in) and was equipped with an advanced Bosch Motronic electronic engine control unit (ECU).[3] This engine (parts code prefix: 034, identification code: AAN), developed a motive power output of 169 kilowatts (230 PS; 227 bhp) at 5,900 revolutions per minute (rpm) and 350 newton metres (258 ft·lbf) of torque 1,950 rpm.[3] This powerplant made it rather powerful by contemporary standards, and the vehicle with five-speed manual transmission was able to accelerate from standstill to 100 kilometres per hour (62.1 mph) in just 6.2 seconds.
Both five- and six-speed manual transmissions (parts code prefix: 01E, identification codes: five-speed: CBD, CET, six-speed: CBL, CMG) were offered to European customers, but a five-speed manual was the only transmission available in North America; a four-speed automatic transmission (parts code prefix: 01F, identification code: CBF) was available as an option worldwide.[3] Front and rear axle final drive ratio is either 4.111 or 3.889 (dependent on transmission type), and the rear axle (parts code prefix: 017, identification codes: AAT, AET) uses a driver-selectable electro-pneumatic-mechanical switchable diff lock.[3]
Audi's quattro four-wheel-drive system was standard on the C4 S4/S6; a first-generation Torsen-based system which used the "T-1" automatically biasing centre differential (ATB) was used on vehicles equipped with manual transmissions, while a transfer box based system was used on vehicles equipped with an automatic transmission.[3]
S4/S6 "Plus" models equipped with a 4.2 litre 206 kilowatts (280 PS; 276 bhp) all-aluminium alloy V8 engine (parts code prefix: 077, identification code: ABH) became available to European customers as an option from October 1992, only with the six-speed manual gearbox, in either saloon or Avant bodystyles.[3]
All C4 S4s' came equipped as standard with a conventional fixed-assistance rack and pinion power assisted steering (PAS) system. An electronically controlled 'servotronic' system, which varied the level of assistance in accordance with the road speed, was available as an option.[3]
There were two different types of high performance brake systems on offer for the C4 S4.[3] All S4s' initially had 310 millimetres (12.20 in) diameter by 25 millimetres (0.984 in) thick, radially ventilated disc brakes up front, each with an ATE single-piston sliding caliper inside a 'UFO' styled bell-shaped disc. With the introduction of the V8 engine, a new front brake setup became standard; again the discs used radial ventilation, but these front discs were now sized at 314 millimetres (12.36 in) by 30 millimetres (1.181 in) - with a conventionally mounted Lucas-Girling caliper in an external position over the disc. US models had smaller 276 millimetres (10.87 in) discs. The rear brakes, 269 millimetres (10.59 in) by 20 millimetres (0.787 in) and also radially ventilated - remained the same throughout C4 production; they used a Lucas-Girling single-piston sliding caliper with an integrated cable-actuated handbrake mechanism. A Bosch three-channel operation (four-channel sensing) Anti-lock Braking System (ABS) with a mechanical load sensing valve for the rear brakes was standard throughout production.[3]
For roadwheel options, the standard five-arm "fuch" forged alloy wheels were 8.0Jx16H2 ET40, and were shod with 225/50 R16 sized tyres. Three other tyre and roadwheel designs were optionally available: a 7.5Jx15H2 ET40 six-spoke with 215/60 R15 tyres, a 8.0Jx16H2 ET40 five-double-spoke, and a 8.0Jx17H2 ET40 ten-spoke.[3]
| Production | October 1997–September 2001[3] |
|---|---|
| Predecessor | Audi B4 S2 |
| Successor | Audi B6 S4 |
| Body style | 4-door saloon/sedan[3] 5-door estate/wagon (Avant)[3] |
| Platform | Volkswagen Group B5 |
| Engine | 2.7 L V6 30v 2xDOHC 'biturbo'[3] |
| Transmission | 6-speed manual,[3] 5-speed ZF 5HP19 tiptronic automatic[3] |
| Wheelbase | 2,615 mm (103.0 in) |
| Length | 4,483 mm (176.5 in) |
| Width | 1997-99: 1,733 mm (68.2 in) 2000-02: 1,848 mm (72.8 in) |
| Height | saloon: 1,396 mm (55.0 in) Avant: 1,418 mm (55.8 in) |
| Kerb weight | 1,535 kg (3,384 lb) to 1,680 kg (3,704 lb) |
| Related | Audi B5 A4 Audi B5 RS4 |
The second generation S4 (Typ 8D), now correctly titled Audi S4 quattro debuted in 1997, with factory production commencing October 1997,[3] as part of the facelifted B5 platform Audi A4 line-up, although it wasn't available in North America until late 1999.
In addition to the saloon (sedan), an estate version (wagon)–the Audi S4 Avant–was introduced into the lineup from 1998. Production of the B5 S4 ceased in September 2001,[3] although it was still sold together with the next B6 platform generation through 2002 in North America. Examples produced July 2001 to end of production are 2002 Model Year cars, the 10th digit of the VIN being the number "2".
Several years after it was sold new, the B5 S4 remains a potent enthusiast car, and as featured in the December 2007 issue of Sport Compact Car magazine, a Torque Factory tuned S4 won a comparison test against several other extreme performance cars.[6]
The powertrain detail[3] of the B5 S4 features a 2.7 litre twin-turbo ('biturbo') 90° third-generation V6 engine (parts code prefix: 078, identification codes: AGB, AZB). Detail of the powerplant includes a cast iron cylinder block with two lightweight aluminium alloy cylinder heads. The valvetrain includes 30 valves (five valves per cylinder),[7][8] twin hybrid-driven (timing belt and roller chain) double overhead camshafts and variable valve timing for the inlet valves. The charged intake air is cooled with the aid of two side-mounted intercoolers (SMICs). It displaces 2,671 cubic centimetres (163.0 cu in), and is rated to produce a motive power output of 195 kilowatts (265 PS; 261 bhp) at 5,800 revolutions per minute (rpm), and generates 400 newton metres (295 ft·lbf) of torque at 1,850 rpm. Engine management was by way of a Bosch Motronic ME 7.1 (7.0 in North America) electronic engine control unit (ECU), and helped it meet the European EU-3D emissions standard. For a short time scale (08/98-12/98) in the North American market, the engine was slightly detuned to meet US emissions regulations, output was reduced to 187 kilowatts (254 PS; 251 bhp) and 350 newton metres (258 ft·lbf) (identification code: APB).
As in the previous S4, a six-speed C90 manual transmission (parts code prefix: 01E, identification code: DSY, gear ratios: 1st: 3.500, 2nd: 1.889, 3rd: 1.231, 4th: 0.967, 5th: 0.806, 6th: 0.684) was standard equipment, as was the Torsen T-2 quattro permanent four-wheel drive system. Final drive (parts code prefix: 01H, identification code: DQA) ratio is 4.111. A five-speed ZF 5HP19 tiptronic automatic transmission (parts code prefix:01V) became available for the first time as an option.[3]
The B5 S4 claims acceleration from 0 to 100 kilometres per hour (0 to 62.1 mph) in 5.6 seconds, and had an electronically-limited top speed of 250 km/h (155.3 mph), making it both the quickest saloon/sedan in the Audi model line, and among the quickest saloon/sedans in the world at that time.
The B5 S4 brake system[3] consisted of radially ventilated discs, 321 millimetres (12.64 in) in diameter by 30 mm (1.18 in) thick up front, and 256 mm (10.08 in) by 22 mm (0.87 in) at the rear. Two-piston Lucas HP2 brake calipers at the front (with four pads per caliper), with Lucas single-piston sliding brake calipers at the rear. A Bosch ABS 5.3 four-channel Anti-lock Braking System (with Electronic Brakeforce Distribution (EBD) and Electronic Differential Lock (EDL) - and later with ESP or Electronic Stability Programme), coupled with a vacuum servo completed the system.
Standard roadwheels[3] were Audi's die-cast aluminium alloy six-arm 'Avus' 7.5Jx17H2 ET45 alloy wheels, shod with 225/45 ZR17 performance tyres.
Available exterior colors included Brilliant Black, Laser Red, Light Silver, Cactus Green, Santorin Blue, Hibiscus Red, Casablanca White, Imola Yellow, and Nogaro Blue. The last two colors were exclusive to the S4 model. Interior leather was available in Oynx or Silver. Available options included:
The Sport Package replaced the wood-grain belt line trim with sliver aluminum trim, and the wood grain finish around the shifter with black plastic. The Alcantara seat inserts were silver (on Oynx leather). With the black, white, or blue exteriors, the inserts were also available in blue Alcantara. On the early 2000 models, the Alcantara inserts in the rear seats did not fuly extend forward to the front edge of the seat.
A motor racing version of the car achieved great success in the SpeedVision World Challenge with Michael Galati taking the 2001 SpeedVision GT title in a Champion Racing S4, winning four races, and helping Audi to its first Manufacturers' Championship.
The Audi Sport specification Champion A4 chassis included a B5 RS4 engine, and Alcon racing brake calipers - 4-pot fronts and 2-pot rears.
Audi B6 S4 Cabriolet (US) |
|
| Production | Mar 2003–Dec 2004 Feb 2004–Dec 2005 (Cabrio)[3] |
|---|---|
| Predecessor | Audi B5 S4 |
| Successor | Audi B7 S4 |
| Body style | 4-door saloon/sedan,[3] 5-door estate/wagon (Avant),[3] 2-door cabriolet[3] |
| Platform | Volkswagen Group B6 (PL46) |
| Engine | 4.2 L V8 40v 2xDOHC[3] |
| Transmission | 6-speed Getrag manual,[3] 6-speed ZF 6HP19 tiptronic automatic[3] |
| Wheelbase | 2,651 mm (104.4 in), Cabrio: 2,654 mm (104.5 in) |
| Length | 4,575 mm (180.1 in), Cabrio: 4,573 mm (180.0 in) |
| Width | 1,781 mm (70.1 in), Cabrio: 1,778 mm (70.0 in) |
| Height | 1,415 mm (55.7 in), Cabrio: 1,391 mm (54.8 in) |
| Kerb weight | saloon: 1,660 kg (3,660 lb) estate: 1,720 kg (3,792 lb) cabriolet: 1,855 kg (4,090 lb) |
| Related | Audi B6 A4 |
The third generation Audi S4 quattro (Typ 8E — saloon: 8E2, Avant: 8E5, and Cabriolet: 8H7) debuted its saloon and Avant bodystyles in Europe in March 2003,[3] and appeared in North America slightly later. This was based on the latest Volkswagen Group B6 (PL46) platform used by the then current Audi B6 A4. Despite having moved to an entirely new platform, one of the S4's most publicised new features was its new internal combustion engine - a 4.2 litre V8 engine. Following its initial launch of either a four-door five-seat saloon (sedan), or a five-door five-seat Avant (estate/wagon), it eventually became available in three bodystyles - and for the first time in the Audi 'S' car range, from February 2004, a two-door four-seat Cabriolet (convertible), Typ 8H, was included in the model range.[9]
Official performance figures for standard discipline of sprinting from standstill to 100 kilometres per hour (62.1 mph) in the saloon with manual transmission are 5.6 seconds (Avant 5.8 s, Cabriolet 5.9 s), however, a road test conducted by the American automotive magazine Motor Trend[10] indicated that it could go from a standstill to 60 mph (96.6 km/h) in less than 5 seconds, and make it to 200 km/h (124.3 mph) in slightly over 20 seconds, although doing this led to fuel consumption dipping into single digits, considerably lower than the earlier V6 models, leading to the addition of a $1,700 gas guzzler tax (combined 20.2 miles per US gallon (11.6 L/100 km; 24.3 mpg-imp)) for the six-speed manual sedan in the United States. Top speed is electronically limited to 250 km/h (155.3 mph).
The B6 S4 saloon and Avant variants ceased factory production in December 2004, with the Cabriolet ending twelve months later at December 2005.[3]
Replacing the 2.7 litre 'biturbo' V6 engine of the previous generation B5 S4, the new B6 S4 powertrain[3] gained an all-aluminium alloy 4.2 litre, 40 valve (five valves per cylinder) V8 engine (parts code prefix: 079.C, identification code: BBK), with twin chain-driven (at the rear of the engine) two double overhead camshafts (2xDOHC) (two per cylinder bank - 'quad cam'), roller-finger rocker arm cam followers, and included variable inlet camshaft timing. It also utilised a strengthened alloy crankshaft bedplate for the five main bearings, and a two-part baffled oil sump, and a light-alloy variable intake manifold (VIM), containing the sequentially actuated fuel injectors. This petrol engine, based on the unit from the Audi A8, displaces 4,163 cubic centimetres (254.0 cu in), and it produces a motive power output of 253 kilowatts (344 PS; 339 bhp) at 7,000 revolutions per minute (rpm), and generates torque of 410 newton metres (302 ft·lbf) at 3,500 rpm, making it more potent than the RS2 Avant, and nearly as powerful as the B5 RS4. Engine management was by way of a Bosch Motronic ME 7.1.1 electronic engine control unit (ECU), utilising a Bosch 'E-Gas' drive by wire electronic throttle, and powering eight individual spark coils with longlife quad-electrode Bosch spark plugs. Ignition timing is a mapped direct ignition, with cylinder-selective knock control with the aid of four knock sensors. The exhaust system includes vacuum-operated valves in the twin rear silencers (mufflers), finished with chrome plated tail-pipes.
Like its predecessors, the B6 S4 was standard with a Getrag six-speed (M6S) manual transmission (parts code prefix: 0A3, identification codes: FVD, HEP) (gear ratios - 1st: 3.667, 2nd: 2.050, 3rd: 1.462, 4th: 1.133, 5th: 0.919, 6th: 0.778),[3] with a 240 millimetre single plate dry clutch, and Torsen T-2 quattro permanent four-wheel drive system. Final drive (parts code prefix: 01R, identification code: EXZ) ratios are 3.889,[3] giving a top gear road speed to engine revs ratio of 24.4 miles per hour (39.3 km/h) per 1000 rpm. From July 2003,[3] the ZF 6HP19 tiptronic automatic transmission (parts code prefix: 09L, identification codes: GUR, HHU) (ratios - 1st: 4.171, 2nd: 2.340, 3rd: 1.521, 4th: 1.143, 5th: 0.867, 6th: 0.691, with a final drive (identification code: GDF) ratio of 3.539) was included as an option.
An unusual sight in the engine compartment was the addition of water cooling for the 190 amp alternator,[3] along with two additional thermostatically-controlled side-mounted radiators.[3]
The B6 S4 came equipped with electronically controlled, variable assisted 'servotronic' rack and pinion power assisted steering (PAS) as standard.[3]
B6 S4 brakes[3] consisted of radially ventilated disc brakes front and rear. The front discs are sized at 345 millimetres (13.58 in) in diameter by 30 mm (1.181 in) thick, and are clamped by Continental Teves-ATE FNRG-60 single-piston sliding brake calipers. The rears are 300 mm (11.81 in) by 22 mm (0.866 in), and again use single-piston sliding calipers, with an integrated cable-operated hand brake mechanism. A Bosch ESP 5.7 Electronic Stability Programme system, complete with Anti-lock Braking System (ABS), Electronic Brakeforce Distribution (EBD), Emergency Brake Assist (EBA), Electronic Differential Lock (EDL) and Anti-Slip Regulation (ASR) - also known as traction control system, coupled with a dual-rate tandem vacuum servo provided the brake actuation.
Standard alloy wheels[3] were 'Avus-III' die-cast aluminium alloy, 8.0Jx18H2 ET45 in size, and shod with 235/40 ZR18 95Y XL (eXtra Load) high performance tyres, with factory supplies being either Continental SportContact2 or Michelin PilotSport PS2.
Discrete lower door trims, along with the now trademark Audi 'S' model vertical-emphasis line grille, and solid aluminium (later replaced with plastic covered by aluminium) exterior door mirrors, and S4 badging front and rear are all that visually distinguish the S4 from its related A4 brethren. In the interior, front and rear Recaro seats (fronts fully electric), standard carbon fibre trims, as well as S4 logos in the instrument panel and door sills complete the detail.
Audi B7 S4 Avant in Sprint Blue with Avus-III alloy wheels |
|
| Production | Nov 2004–Jun 2008[3] Jan 2006–2008 (cabrio) |
|---|---|
| Predecessor | Audi B6 S4 |
| Successor | Audi B8 S4 |
| Body style | 4-door saloon/sedan,[3] 5-door estate/wagon (Avant),[3] 2-door Cabriolet[3] |
| Platform | Volkswagen Group B7 (PL46) |
| Engine | 4.2 L V8 40v 2xDOHC[3] |
| Transmission | 6-speed Getrag manual,[3] 6-speed ZF 6HP19 tiptronic automatic[3] |
| Wheelbase | 2,648 mm (104.3 in) Cabrio: 2,654 mm (104.5 in) |
| Length | 4,586 mm (180.6 in) Cabrio: 4,572 mm (180.0 in) |
| Width | 1,781 mm (70.1 in) Cabrio: 1,778 mm (70.0 in) |
| Height | 1,415 mm (55.7 in) Cabrio: 1,392 mm (54.8 in) |
| Related | Audi B7 A4 Audi B7 RS4 SEAT Exeo |
The Audi B7 platform Audi S4 quattro, based on the Audi B7 A4, debuted in late 2005. Although Audi classifies it as a new car, the differences between it and the outgoing B6 S4 casually appear to be primarily cosmetic, and is still classified by the internal designation: Typ 8E (although with revised sub-designations - saloon: 8EC, Avant: 8ED, and Cabriolet: 8HE).[3] It has the same 4.2 litre V8 engine (identification code: BBK) as the B6 S4, producing a power output of 253 kilowatts (344 PS; 339 bhp) at 7,000 revolutions per minute (rpm), and 410 newton metres (302 ft·lbf) torque at 3,500 rpm.
There are a few mechanical changes, such as revised springs and dampers and, from model year 2007, an updated Torsen T-3 automatically biasing centre differential, featuring a 'default' asymmetric 40:60 front-rear torque split on manual transmission models, along with the later Bosch ESP 8.0 Electronic Stability Programme[3] and gloss black painted brake calipers.[3] The 'Avus-III' roadwheels now became an option, and were replaced by a standard offering 8.0Jx18 inch 'S-design' 7-spoke forged alloy wheel.[3]
Bose sound system is now standard, whereas it was optional on the B6 S4, and an enhanced optional DVD-ROM-based RNS-E satellite navigation system replaces the previous CD-ROM-based RNS-D option.
The new trapezoidal single-frame grille, Bi-Xenon high-intensity discharge lamp (HID) headlamps, L-shaped tail-lamps, quad exhaust tail pipes, and discrete V8 badging below the side repeater indicators help distinguish the B7 from the previous B6 model.
In June 2005,[3] Audi announced a limited edition run of 250 special edition S4 saloon cars, celebrating 25 years of quattro four wheel drive. This exclusive model was called the Audi S4 25quattro. Available only in the United States, and only in Avus Silver, the exterior has unique front and rear bumpers, a carbon fibre boot lip spoiler and lower front splitter. 15-spoke DTM alloy wheels, along with optional dealer-fitted 'Audi four-rings' decals for the front doors complete the exterior makeover. Black and grey contrasting interior leathers, along with "quattro" embossed into the Recaro seats, together with an individually numbered exclusive quattro gear shift knob for the manual-only gearbox define the interior changes.
On the mechanical side, the S4 25quattro was the second Audi, after the B7 RS4 to be fitted with the latest Torsen T-3 asymmetric ATB centre differential for its quattro permanent four-wheel drive system. Under normal grip conditions, this is set with a default rearwards torque distribution bias of 40:60 front to rear, and a maximum of 100% torque can automatically be apportioned to the rear axle (and up to 80% to the front) as conditions warrant. The final drive ratios are 3.889.
Audi S4 (B8) sedan (Australia) |
|
| Production | Nov 2008–present |
|---|---|
| Predecessor | Audi B7 S4 |
| Body style | 4-door saloon/sedan,[3] 5-door estate/wagon (Avant)[3] |
| Platform | Volkswagen Group MLB/MLP |
| Engine | 3.0 L V6 24v TFSI[3] |
| Transmission | 6-speed manual,[3] 7-speed dual clutch 'S tronic'[3] |
| Wheelbase | 2,811 mm (110.7 in) |
| Length | 4,717 mm (185.7 in) |
| Width | 1,826 mm (71.9 in) |
| Height | saloon: 1,406 mm (55.4 in) estate: 1,415 mm (55.7 in) |
| Kerb weight | 1,650–1,735 kg (3,638–3,825 lb) |
| Related | Audi B8 A4 Audi A5 |
From November 2008, the latest generation of the 'Audi S4 quattro'[11] (Typ 8K) entered factory production.[3] It is based on the current Audi B8 A4,[12] built on the Volkswagen Group MLB/MLP platform. Unlike the previous B6 and B7 models, the new B8 version will only be available as a four-door five-seat saloon (sedan), or a five-door five-seat Avant (estate/wagon). The sport-performance two-door four-seat Cabriolet (convertible) mantle is now taken by the current Audi S5. Unlike previous generations of the S4, only the sedan will be imported to the United States and Canada.
Compared to the previous B6/B7 S4 which used a 4.2 litre V8 engine, this latest B8 S4 utilises a smaller displacement 3.0 litre TFSI V6 engine, but now with the addition of forced induction via a Roots-style Eaton mechanical supercharger.[1]
The previous B6/B7 S4s were the top-of-the-line models in North America, ahead of the 3.2L V6 and 4-cylinder 2.0T A4s, and competed with the BMW M3 which at the time had a high-rev 3.2 L inline 6. The 3.0 TFSI V6 engine replaces the 3.2 litre FSI V6 as the upgrade engine in the A4 and A6 lineups starting for 2009; both the 3.2 litre FSI and 3.0 TFSI were offered together until the end of the 2010 model year.[13] The 3.2L V6 engine is no longer offered in the A4 lineup from the 2011 model year onwards, so the recently introduced B8 S4 is now priced 9% lower than its V8 predecessors, and slots directly above the 4-cylinder 2.0T base model. The S4 now compares more closely with the BMW 335i and Infiniti G37, leaving the next incarnation of the Audi RS4 to compete with the M3.[1][14]
Although still badged as an S model, the B8 S4 is now considered less of a hardcore sport sedan. Enthusiast driver aids are now optional rather than standard, such as active rear differential, active steering and ultra-quick electrically-adjustable shocks (both via Audi Drive Select Package). These trick differentials in the S4 are complex and heavy but they are key to solving the inherent flaw of high-horsepower front-drive vehicles, as the S4's weight distribution remains nose heavy like its predecessors which contributes to understeer. This allows the S4 to perform competitively with more balanced rear-wheel drive sport sedans such as the BMW 335i.[15][16]
The S4 has sport suspension tuned for contributing to the vehicle's handling and braking. It is also meant for providing safety and comfort by keeping the vehicle's passengers relaxed and isolated from road noise, bumps and vibrations.
A new designed roadwheel is included on the B8 S4, an 8.5Jx18" '5-double-spoke S' design alloy wheel with 245/40 ZR18 high performance tyres. Optional 19 inch wheel and tyre packages are also available, sized at 8.5Jx19" alloy wheels with 255/35 ZR19 tyres. LED tail lights are standard fitment, along with Audi's now-trademark LED daytime running lights at the front.
At the heart of the B8 S4 powertrain is an all-new, all aluminium-alloy 3.0 litre TFSI supercharged V6 engine (parts code prefix: 06E, identification code: CAKA),[3] and like the rest of the B8 model range, now with Fuel Stratified Injection (FSI). This petrol engine displaces 2,998 cubic centimetres (182.9 cu in), and it produces a power output of 245 kilowatts (333 PS; 329 bhp) from 5,500 to 7,000 revolutions per minute (rpm). Torque is rated at 440 newton metres (325 ft·lbf) from 2,900 to 5,300 rpm. This high power output is achieved by utilising forced induction – and specifically, an all-new Eaton 'Twin Vortices Series' (TVS) Roots-type positive displacement compressor.[17][18] This new supercharger features twin four-lobe rotors, which are axially-twisted 160 degrees. It is mounted on top of the engine, within the 'Vee', pumping air directly into the inlet manifold, and incorporates two separate water-cooled intercoolers. This new design of supercharger is said to reduce the noise, vibration, and harshness (NVH) of the engine.
This engine is mated to either a six-speed manual transmission (identification code: KMR)[3] or a seven-speed 'S tronic' DL501[19] dual clutch transmission[20] (identification code: LHK),[3] the latter with steering wheel mounted paddle-shifters for tiptronic gear selection, which replaces the Tiptronic automatic transmissions found in the B6/B7 iterations. The 'Audi quattro Sports differential' fitted in the rear axle final drive unit is available as an option.
Acceleration from standstill to 100 kilometres per hour (62.1 mph) takes 5.1 seconds[21] for the saloon with manual gearbox, the Avant one tenth of a second slower at 5.2 seconds. The same dash to 100 km/h in the saloon with S tronic takes 5.3 seconds, and the Avant at 5.4 seconds. The top speed is electronically limited to 250 kilometres per hour (155.3 mph). With figures like these, the B8 S4 accelerates more quickly than its V8-engined predecessors.[1] Audi of America claims that the version of the S4 achieves 28 highway miles per gallon, and a 0 to 60 miles per hour (96.6 km/h) acceleration time of 4.9 seconds with the manual transmission[22] and 5.1 seconds with the S tronic.[23] Fuel consumption is rated at a combined 24.2 miles per US gallon (9.72 L/100 km; 29.1 mpg-imp).[21] Therefore, the B8 S4, unlike the V8-powered B6/7 models, avoids the US gas guzzler tax. The B8 S4's 3.0 TFSI engine also gets only 1 m.p.g. less than the base 2.0 TFSI engine.[24] This is one of the most important reasons for Audi to downsize their engines, while keeping the output equivalent better, by using forced-induction such as supercharging or turbocharging.[1]
Detuned versions of this same engine making 310 hp (231 kW) are found in the 2009-11 Audi A6 3.0 TFSI (C6) mated to a 6-speed Tiptronic automatic transmission, the 2012 Audi A6 3.0 TFSI (C7) and 2012 Audi A7 3.0 TFSI, the latter two which are paired with an 8-speed Tiptronic automatic.
In motor racing, APR Motorsport has currently entered a B8 S4 in the Grand-Am Continental Tire Sports Car Challenge Grand Sport (GS) class.[25]
|
|||||||||||||||||||||||||||||